From d6d9a09d505d11148599a95a5be3e1351edbe0ac Mon Sep 17 00:00:00 2001 From: hc Date: Mon, 13 Apr 2026 15:17:52 +0800 Subject: Local iHealth SDK, device detail screen, iOS event fixes --- .../Communication_SDK/Headers/BP5SRW.h | 101 +++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP5SRW.h (limited to 'libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP5SRW.h') diff --git a/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP5SRW.h b/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP5SRW.h new file mode 100644 index 0000000..e2e8d77 --- /dev/null +++ b/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP5SRW.h @@ -0,0 +1,101 @@ +// +// BP5SRW.h +// testShareCommunication +// +// Created by my on 14/10/13. +// Copyright (c) 2013年 my. All rights reserved. +// + +#import +#import "BPDevice.h" +#import + + +/** + BP5SRW device class + */ +@interface BP5SRW : BPDevice + + + +/** + * Establish measurement connection and start BP measurement. + * @Notice By the first time of new user register via SDK, ‘iHealth disclaimer’ will pop up automatically, and require the user agrees to continue. SDK application requires Internet connection; there is 10-day tryout if SDK cannot connect Internet, SDK is fully functional during tryout period, but will be terminated without verification through Internet after 10 days. + * @param blockZeroState Zeroing state + * @param pressure Pressure value in the process of measurement, the unit is ‘mmHg’. + * @param blockWaveletWithHeartbeat Wavelet data set with heart beat. + * @param blockWaveletWithoutHeartbeat Wavelet data set without heart beat. + * @param result result of the measurement, including systolic pressure, diastolic pressure, pulse rate and irregular judgment. Relevant key: time, sys, dia, heartRate, irregular. + * @param redWave A block to return wave information,include the packets order number(0~255),the current measure status(@1 means measuring，@2 means constant Pressure measuring，@3 means completed),the pressure data type(@1 means pressure data ,@2 means wave data) ,the pressure or wave count ,the pressure or wave data array.The corresponding keys are @"packetOrderID",@"measureStatusID",@"pressureDataType",@"pressureCount",@"pressureArray". + * @param error Return error codes. + * Specification: + * 1. BPError0 = 0: Unable to take measurements due to arm/wrist movements. + * 2. BPError1: Failed to detect systolic pressure. + * 3. BPError2: Failed to detect diastolic pressure. + * 4. BPError3: Pneumatic system blocked or cuff is too tight during inflation. + * 5. BPError4: Pneumatic system leakage or cuff is too loose during inflation. + * 6. BPError5: Cuff pressure reached over 300mmHg. + * 7. BPError6: Cuff pressure reached over 15 mmHg for more than 160 seconds. + * 8. BPError7: Data retrieving error. + * 9. BPError8: Data retrieving error. + * 10. BPError9: Data retrieving error. + * 11. BPError10: Data retrieving error. + * 12. BPError11: Communication Error. + * 13. BPError12: Communication Error. + * 14. BPError13: Low battery. + * 15. BPError14: Device bluetooth set failed. + * 16. BPError15: Systolic exceeds 260mmHg or diastolic exceeds 199mmHg. + * 17. BPError16: Systolic below 60mmHg or diastolic below 40mmHg. + * 18. BPError17: Arm/wrist movement beyond range. + * 19. BPError18: Bleed to specified pressure over time + * 20. BPError19: Constant pressure acquisition process changes over the specified range of pressure. + * 21. BPNormalError=30: device error, error message displayed automatically. + * 22. BPOverTimeError: Abnormal communication. + * 23. BPNoRespondError: Abnormal communication. + * 24. BPBeyondRangeError: device is out of communication range. + * 25. BPDidDisconnect: device is disconnected. + * 26. BPAskToStopMeasure: measurement has been stopped. + * 27. BPInputParameterError=400: Parameter input error. + */ + +-(void)commandStartMeasureWithZeroingState:(BlockZero)blockZeroState pressure:(BlockPressure)pressure waveletWithHeartbeat:(BlockWavelet)blockWaveletWithHeartbeat waveletWithoutHeartbeat:(BlockWavelet)blockWaveletWithoutHeartbeat result:(BlockMeasureResult)result redWave:(BlockRedWaveDic)redWave errorBlock:(BlockError)error; + +/** + * Measurement termination and stop BP5SRW measurement + * @param success The block return means measurement has been terminated. + * @param error A block to return the error in ‘Establish measurement connection’ in BP5SRW. + */ +-(void)stopBPMeassureSuccessBlock:(BlockSuccess)success errorBlock:(BlockError)error; + +/** + * Synchronize time and judge if the device supports BT auto-connection, offline detection, and if the function on or off, corresponding KEY as haveBlue, haveOffline, blueOpen, offlineOpen. ‘True’ means yes or on, ‘False’ means no or off + * @param function A block to return the function and states that the device supports. + * @param error A block to refer ‘error’ in ‘Establish measurement connection’ in BP5SRW. + */ +-(void)commandFunction:(BlockDeviceFunction)function errorBlock:(BlockError)error; + +/** + * Query battery remaining energy + * @param energyValue A block to return the device battery remaining energy percentage, ‘80’ stands for 80%. + * @param error A block to return the error in ‘Establish measurement connection’. + */ +-(void)commandEnergy:(BlockEnergyValue)energyValue errorBlock:(BlockError)error; + + +/** + Set the target measure configure + + @param targetPressure Set the target constant pressure in measuring. + @param fluctuationPressure Set the allowed range of pressure fluctuations. + @param sampleTime Set the pressure sample time. + @param setResult Success callback + @param error A block to return the error in ‘Establish measurement connection’. + */ +-(void)CommandSetPressureSamplewithTargetPressure:(NSNumber *)targetPressure fluctuationRange:(NSNumber *)fluctuationPressure sampleTime:(NSNumber *)sampleTime disposeSetPresureTargetSuccess:(BlockSuccess)setResult errorBlock:(BlockError)error; + +/** + * Disconnect current device + */ +-(void)commandDisconnectDevice; + +@end -- cgit