From d6d9a09d505d11148599a95a5be3e1351edbe0ac Mon Sep 17 00:00:00 2001 From: hc Date: Mon, 13 Apr 2026 15:17:52 +0800 Subject: Local iHealth SDK, device detail screen, iOS event fixes --- .../Communication_SDK/Headers/BP7.h | 141 +++++++++++++++++++++ 1 file changed, 141 insertions(+) create mode 100644 libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP7.h (limited to 'libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP7.h') diff --git a/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP7.h b/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP7.h new file mode 100644 index 0000000..fa9b478 --- /dev/null +++ b/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP7.h @@ -0,0 +1,141 @@ +// +// BP7.h +// testShareCommunication +// +// Created by my on 8/10/13. +// Copyright (c) 2013年 my. All rights reserved. +// + +#import +#import "BPDevice.h" +#import + + +/** + BP7 device class + */ +@interface BP7 : BPDevice +/** + * Synchronize time and judge if the device supports BT auto-connection, offline detection, and if the function on or off, corresponding KEYs are haveBlue, haveOffline, blueOpen, offlineOpen. ‘True’ means yes or on, ‘False’ means no or off + * @param function A block to return the function and states that the device supports. + * @param error A block to refer ‘error’ in ‘Establish measurement connection’ in BP. + */ +-(void)commandFunction:(BlockDeviceFunction)function errorBlock:(BlockError)error; + +/** + *set up BT auto-connection + * @param open True means on; False means off. + * @param blockBuleSet The device current statues, True means on, False means off. + * @param error A block to refer ‘error’ in ‘Establish measurement connection’ in BP. + */ +-(void)commandSetBlueConnect:(BOOL)open respond:(BlockBlueSet)blockBuleSet errorBlock:(BlockError)error; + +/** + * set up offline detection + * @param open True means on; False means off. + * @param successBlock A block to refer ‘set success’. + * @param errorBlock A block to refer ‘set failed’. + */ +-(void)commandSetOffline:(BOOL)open success:(BlockSuccess)successBlock error:(BlockError)errorBlock; +/** + * set up offline detection (Deprecated) + * @param open True means on; False means off. + * @param error A block to refer ‘error’ in ‘Establish measurement connection’ in BP. + */ +-(void)commandSetOffline:(BOOL)open errorBlock:(BlockError)error; + + +/** + * Query battery remaining energy + * @param energyValue A block to return the device battery remaining energy percentage, ‘80’ stands for 80%. + * @param error A block to return the error in ‘Establish measurement connection’ + */ +-(void)commandEnergy:(BlockEnergyValue)energyValue errorBlock:(BlockError)error; + + +/** + * Get current angle(only for BP7，This function needs to be called before the call of the start measure function) + * @param angleInfo Angle information, including angle、isLeftHand. ‘angle’ stands for the inclination angle of the device, from 0 to 90; ‘isLeftHand’ stands for the judgment if the device is on the left hand, ‘true’ means left hand, otherwise is right hand. + * @param error error codes. + * Specification: + * 1. BPError0 = 0: Unable to take measurements due to arm/wrist movements. + * 2. BPError1: Failed to detect systolic pressure. + * 3. BPError2: Failed to detect diastolic pressure. + * 4. BPError3: Pneumatic system blocked or cuff is too tight during inflation. + * 5. BPError4: Pneumatic system leakage or cuff is too loose during inflation. + * 6. BPError5: Cuff pressure reached over 300mmHg. + * 7. BPError6: Cuff pressure reached over 15 mmHg for more than 160 seconds. + * 8. BPError7: Data retrieving error. + * 9. BPError8: Data retrieving error. + * 10. BPError9: Data retrieving error. + * 11. BPError10: Data retrieving error. + * 12. BPError11: Communication Error. + * 13. BPError12: Communication Error. + * 14. BPError13: Low battery. + * 15. BPError14: Device bluetooth set failed. + * 16. BPError15: Systolic exceeds 260mmHg or diastolic exceeds 199mmHg. + * 17. BPError16: Systolic below 60mmHg or diastolic below 40mmHg. + * 18. BPError17: Arm/wrist movement beyond range. + * 19. BPNormalError=30: device error, error message displayed automatically. + * 20. BPOverTimeError: Abnormal communication. + * 21. BPNoRespondError: Abnormal communication. + * 22. BPBeyondRangeError: device is out of communication range. + * 23. BPDidDisconnect: device is disconnected. + * 24. BPAskToStopMeasure: measurement has been stopped. + * 25. BPInputParameterError=400: Parameter input error. + */ +-(void)commandStartGetAngle:(BlockAngle)angleInfo errorBlock:(BlockError)error; + +/* + * Measurement start(only for BP7). When ‘angle’ is between 10-30, measurement starts + * @param blockZeroState Zeroing state + * @param Pressure Pressure value in the process of measurement, the unit is ‘mmHg’. + * @param blockWaveletWithHeartbeat Wavelet data set with heart beat. + * @param blockWaveletWithoutHeartbeat Wavelet data set without heart beat. + * @param Result result including systolic pressure, diastolic pressure, pulse rate and irregular judgment. Relevant key: time, sys, dia, heartRate, irregular. irregular will be 0 or 1. + * @param error error codes. + * Specification: + * 1. BPNormalError: device error, error message displayed automatically. + * 2. BPOverTimeError: communication over time error. + * 3. BPNoRespondError: abnormal communication. + * 4. BPBeyondRangeError: device is out of communication range. + * 5. BPDidDisconnect: device is disconnected. + * 6. BPAskToStopMeasure: measurement has been stopped. + */ + +-(void)commandStartMeasureWithZeroingState:(BlockZero)blockZeroState pressure:(BlockPressure)pressure waveletWithHeartbeat:(BlockWavelet)blockWaveletWithHeartbeat waveletWithoutHeartbeat:(BlockWavelet)blockWaveletWithoutHeartbeat result:(BlockMeasureResult)result errorBlock:(BlockError)error; + +/** + * upload offline data (Deprecated) + * @param totalCount item quantity of total data. + * @param progress upload completion ratio , from 0.0 to 1.0 or 0%~100％, 100% means upload completed. + * @param uploadDataArray offline data set, including measurement time, systolic pressure, diastolic pressure, pulse rate, irregular judgment. corresponding KEYs are time, sys, dia, heartRate, irregular. + * @param error refer ‘error’ in ‘Establish measurement connection’ in BP. + */ +-(void)commandBatchUpload:(BlockBachCount)totalCount progress:(BlockBachProgress)progress dataArray:(BlockBachArray)uploadDataArray errorBlock:(BlockError)error; + +/** + * Upload offline data total Count. + * @param totalCount item quantity of total data. + * @param error A block to return the error. + */ +-(void)commandTransferMemoryTotalCount:(BlockBachCount)totalCount errorBlock:(BlockError)error; + +/** + * Upload offline data. + * @Notice By the first time of new user register via SDK, ‘iHealth disclaimer’ will pop up automatically, and require the user agrees to continue. SDK application requires Internet connection; there is 10-day tryout if SDK cannot connect Internet, SDK is fully functional during tryout period, but will be terminated without verification through Internet after 10 days. + * @param totalCount item quantity of total data + * @param progress upload completion ratio , from 0.0 to 1.0 or 0%~100％, 100% means upload completed. + * @param uploadDataArray offline data set, including measurement time, systolic pressure, diastolic pressure, pulse rate, irregular judgment,scheme ID,body movement flag. corresponding KEYs are time, sys, dia, heartRate, irregular,schemeID,bodyMovementFlg. + * @param error A block to return the error. + */ +-(void)commandTransferMemoryDataWithTotalCount:(BlockBachCount)totalCount progress:(BlockBachProgress)progress dataArray:(BlockBachArray)uploadDataArray errorBlock:(BlockError)error; + +/** + * Measurement termination and stop BP measurement + * @param success The block return means measurement has been terminated. + * @param error A block to return the error in ‘Establish measurement connection’ in BP. + */ +-(void)stopBPMeassureSuccessBlock:(BlockSuccess)success errorBlock:(BlockError)error; + +@end -- cgit