// // IDOAllOrder.h // VeryfitSDK // // Created by hedongyang on 2018/6/12. // Copyright © 2018年 hedongyang. All rights reserved. // #import #if __has_include() #elif __has_include() #else #import "IDOBindEnum.h" #import "IDOBluetoothBaseModel.h" #import "IDOGetInfoBluetoothModel.h" #import "IDOSetInfoBluetoothModel.h" #import "IDODataExchangeModel.h" #endif @interface IDOFoundationCommand : NSObject #pragma mark ======= control Command ======= /** 设备进入ota模式通知 | Notification of device enter ota mode */ + (void)didOta; /** 设备退出ota模式通知 | Notification of device exit ota mode */ + (void)disOta; /** 断开发送通知 | Disconnect notification */ + (void)disConnect; /** * 连接失败通知 | connection failed */ + (void)connectionFailed; /** * 发送提示消息 （只用于DH项目中） | Send prompt message （used only for DH） */ + (void)sendPromptInformation:(NSString*_Nullable)info; /** * @brief 音乐开始 | Music begins * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)musicStartCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 音乐结束 | End of music * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)musicStopCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 相机开始 | Camera starts * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)cameraStartCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 相机结束 | Camera ends * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)cameraStopCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 开始寻找设备 | Start looking for equipment * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)findDeviceStartCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 结束寻找设备 | End finding equipment * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)findDeviceStopCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 打开ANCS(苹果通知中心) | Open ANCS (Apple Notification Center) * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)belOpenAncsCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 关闭ANCS(苹果通知中心) | Close ANCS (Apple Notification Center) * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)belCloseAncsCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 设备绑定 | Device Binding * @param bindModel 绑定 model (IDOSetBindingInfoBluetoothModel) (只有在授权绑定才会存储数据) * Binding model (IDOSetBindingInfoBluetoothModel) (Data will only be stored if the binding is authorized) * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)bindingCommand:(IDOSetBindingInfoBluetoothModel * _Nullable)bindModel callback:(void (^_Nullable)(IDO_BIND_STATUS status, int errorCode))callback; /** * @brief 连线设备解绑 | Unbundling equipment * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)unbindingCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 解绑切换设备,但不删除手环和app数据 | switch device not delete the bracelet and app data * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)switchDeviceCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 设备强制解绑,设备连接时,双方解绑,设备断开时,app单方解绑 | Device forced unbundling * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)mandatoryUnbindingCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 手环主动解绑 | Active unbinding of the bracelet * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str,state:0x00:无效，0x01:手环已经解绑) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr,state:0x00:invalid，0x01:bracelet has been untied) */ + (void)braceletUnbundlingCommand:(void(^_Nullable)(int errorCode,int state))callback; /** * @brief 设备配置复位 | Device Configuration Reset * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)setDefaultConfigCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 控制设备重启(重启设备后手环会马上断线) | Control device restart （The bracelet disconnects immediately after restarting the device） * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)setAppRebootCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 获取扩展功能列表 | Get the list of extended features * @param callback 执行回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Execute callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)getFuncTableExCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 设备进入ota升级模式 | The device enters the ota upgrade mode. * @param callback 执行回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Execute callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) * state 0x00 : 成功；0x01 ：电量过低；0x02 ：设备不支持；0x03 ：参数不正确 | 0x00: success; 0x01: low power; 0x02: device not supported; 0x03: parameter error */ + (void)setOtaCommand:(void(^_Nullable)(int state , int errorCode))callback; /** * @brief 手环检查版本号 | The bracelet checks the version number. * @param model | check update version numbder model * @param callback 执行回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Execute callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) * state 0x00 : 请求成功；0x01 ：发生失败； * state 0x00: success; 0x01: failed; */ + (void)checkUpdateReplyCommand:(IDOCheckUpdateBluetoothModel *_Nullable)model callback:(void(^_Nullable)(int state , int errorCode))callback; #pragma mark ======= set Command ======= /** * @brief 设置授权码绑定 | Set Authorization Code Binding * @param bindModel 绑定 model (IDOSetBindingInfoBluetoothModel) | binding model * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setAuthCodeCommand:(IDOSetBindingInfoBluetoothModel * _Nullable)bindModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置当前时间 | Set current time * @param timeModel 时间 model (IDOSetTimeInfoBluetoothModel) | time model (IDOSetTimeInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setCurrentTimeCommand:(IDOSetTimeInfoBluetoothModel * _Nullable)timeModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置闹钟 | Set an alarm * @param alarmModel 闹钟 model (IDOSetAlarmInfoBluetoothModel) | Alarm clock model (IDOSetAlarmInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setAlarmCommand:(IDOSetAlarmInfoBluetoothModel * _Nullable)alarmModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 批量设置闹钟 | Set alarms in batches * @param alarmModels 闹钟集合 model (IDOSetAlarmInfoBluetoothModel) | Alarm clock collection model (IDOSetAlarmInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setAllAlarmsCommand:(NSArray * _Nullable)alarmModels callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置用户信息 | Setting user information * @param userModel 用户信息 model (IDOSetUserInfoBuletoothModel) | User Information model (IDOSetUserInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setUserInfoCommand:(IDOSetUserInfoBuletoothModel * _Nullable)userModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置卡路里和距离目标 | Set calories and distance targets * @param userModel 用户信息 model (IDOSetUserInfoBuletoothModel) | User Information model (IDOSetUserInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setCalorieAndDistanceGoalCommand:(IDOSetUserInfoBuletoothModel * _Nullable)userModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置目标 | Setting goals * @param targetModel 目标信息 model (IDOSetUserInfoBuletoothModel) | targetModel target information model (IDOSetUserInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setTargetInfoCommand:(IDOSetUserInfoBuletoothModel * _Nullable)targetModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置通知中心、来电提醒开关 ⚠️在配对过程中不要执行其他命令。如果设备没有配对，会发起配对，等配对成功后再执行设置子开关状态，需要配对耗时比较长请监听回调。 * Set up notification center, call alert switch.⚠️Do not execute other commands during pairing. * If there is no pairing on the device, a pairing will be initiated, and the sub-switch state will be set after the pairing is successful. * If pairing takes a long time, please listen for the callback. * @param noticModel 通知开关信息 model (IDOSetNoticeInfoBuletoothModel) * Notification switch information model (IDOSetNoticeInfoBuletoothModel) * @param callback 设置后配对过程状态回调 stateCode:0x00为不明异常超时,0x01为系统配对成功,0x02为取消配对,isNeedDisconnect:是否需要断开重连,is need to disconnect and reconnect * stateCode :0x00 indicates an unknown abnormal timeout,0x01 indicates successful system pairing, and 0x02 indicates unpairing * @param complete 设置后完成配对回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setSwitchNoticeCommand:(IDOSetNoticeInfoBuletoothModel * _Nullable)noticModel callback:(void (^_Nullable)(BOOL isNeedDisconnect,int stateCode))callback complete:(void (^_Nullable)(int errorCode))complete; /** * @brief 设置通知中心、来电提醒开关，此方法只设置子开关状态。 * Set up notification center, call alert switch.method sets only the subswitch state * @param noticModel 通知开关信息 model (IDOSetNoticeInfoBuletoothModel) * Notification switch information model (IDOSetNoticeInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setChildSwitchNoticeStateCommand:(IDOSetNoticeInfoBuletoothModel * _Nullable)noticModel callback:(void (^_Nullable)(int errorCode))callback; /** * @brief 设置蓝牙配对 (不可重复设置,会引起无法再连接设备.只要配对成功,就不需要再设置,只有获取到系统配对设备被忽略,才可设置配对。⚠️在配对过程中不要执行其他命令。) * Set up Bluetooth pairing (cannot be set repeatedly, it will cause the device to be connected again. As long as the pairing is successful, * you don't need to set it again. Only when the system pairing device is ignored, the pairing can be set.⚠️Do not execute other commands during pairing.) * @param callback 设置后配对过程状态回调 stateCode:0x00为不明异常超时,0x01为系统配对成功,0x02为取消配对,isNeedDisconnect:是否需要断开重连,is need to disconnect and reconnect * stateCode :0x00 indicates an unknown abnormal timeout,0x01 indicates successful system pairing, and 0x02 indicates unpairing * @param complete 设置后完成配对回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setBluetoothPairingCommandWithCallback:(void (^_Nullable)(BOOL isNeedDisconnect,int stateCode))callback pairingComplete:(void (^_Nullable)(int errorCode))complete; /** * @brief 设置寻找手机 | Set looking for a mobile phone * @param findModel 寻找手机信息 model (IDOSetFindPhoneInfoBuletoothModel) * Find mobile information model (IDOSetFindPhoneInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setFindPhoneCommand:(IDOSetFindPhoneInfoBuletoothModel * _Nullable)findModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置抬腕 | Set the wrist * @param handUpmodel 抬腕信息 model (IDOSetHandUpInfoBuletoothModel) * Wrist information model (IDOSetHandUpInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setHandUpCommand:(IDOSetHandUpInfoBuletoothModel * _Nullable)handUpmodel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置左右手佩戴 | Set the left and right hand to wear * @param handModel 左右手佩戴 model (IDOSetLeftOrRightInfoBuletoothModel) * Left and right hand wearing model (IDOSetLeftOrRightInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setLeftRightHandCommand:(IDOSetLeftOrRightInfoBuletoothModel *_Nullable)handModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置音乐开关 | Set music switch * @param openMusicModel 音乐开关 model (IDOSetMusicOpenInfoBuletoothModel) * Music Switch model (IDOSetMusicOpenInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setOpenMusicCommand:(IDOSetMusicOpenInfoBuletoothModel * _Nullable)openMusicModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置预防丢失 | Set to prevent loss * @param lostModel 预防丢失 model (IDOSetPreventLostInfoBuletoothModel) * Prevent loss model (IDOSetPreventLostInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setPreventLostCommand:(IDOSetPreventLostInfoBuletoothModel * _Nullable)lostModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置显示模式 | Setting the display mode * @param displaModel 显示模式 model (IDOSetDisplayModeInfoBluetoothModel) * Display mode model (IDOSetDisplayModeInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setDisplayModeCommand:(IDOSetDisplayModeInfoBluetoothModel * _Nullable)displaModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置久坐 | Set sedentary * @param longSitModel 久坐 model (IDOSetLongSitInfoBuletoothModel) * Sedentary model (IDOSetLongSitInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setLongSitCommand:(IDOSetLongSitInfoBuletoothModel * _Nullable)longSitModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置天气预报开关 | Set the weather forecast switch * @param weatherModel 天气预报开关 model (IDOSetWeatherSwitchInfoBluetoothModel) * Weather Forecast Switch model (IDOSetWeatherSwitchInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setWeatherCommand:(IDOSetWeatherSwitchInfoBluetoothModel * _Nullable)weatherModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置心率模式 | Set heart rate mode * @param hrModeModel 心率模式 model (IDOSetHRModeInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setHrModeCommand:(IDOSetHrModeInfoBluetoothModel * _Nullable)hrModeModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置防打扰模式 | Set the anti-disturb mode * @param noDisturbModeModel 防打扰模式 model (IDOSetNoDisturbModeInfoBluetoothModel) * Anti-disturbance mode model (IDOSetNoDisturbModeInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setNoDisturbModeCommand:(IDOSetNoDisturbModeInfoBluetoothModel * _Nullable)noDisturbModeModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置心率间隔 | Set heart rate interval * @param hrIntervalModel 心率间隔 model (IDOSetHrIntervalInfoBluetoothModel) * Heart Rate Interval model (IDOSetHrIntervalInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setHrIntervalCommand:(IDOSetHrIntervalInfoBluetoothModel * _Nullable)hrIntervalModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置单位 | Setting unit * @param unitModel 单位 model (IDOSetUnitInfoBluetoothModel) | unit model (IDOSetUnitInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setUnitCommand:(IDOSetUnitInfoBluetoothModel * _Nullable)unitModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置一键呼叫 | Set up a one-click call * @param oneKeySOSModel 一键呼叫 model (IDOSetOneKeySosInfoBuletoothModel) * One-click calling model (IDOSetOneKeySosInfoBuletoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setOneKeySosCommand:(IDOSetOneKeySosInfoBuletoothModel * _Nullable)oneKeySOSModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置快捷方式 | Setting shortcuts * @param shortcutModel 快捷方式 model (IDOSetShortcutInfoBluetoothModel) | Shortcut model (IDOSetShortcutInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setShortcutCommand:(IDOSetShortcutInfoBluetoothModel * _Nullable)shortcutModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置血压舒张、收缩 | Set blood pressure to relax and contract * @param calModel 血压舒张、收缩 model (IDOSetBloodPressureInfoBluetoothModel) * Blood pressure diastolic, contraction model (IDOSetBloodPressureInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str ; model包含校准状态值) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setBpCalCommand:(IDOSetBloodPressureInfoBluetoothModel * _Nullable)calModel callback:(void(^_Nullable)(int errorCode,IDOSetBloodPressureInfoBluetoothModel * _Nullable model))callback; /** * @brief 设置运动快捷方式 | Set motion shortcuts * @param sportSelectModel 运动快捷方式 model (IDOSetSportShortcutInfoBluetoothModel) * Sports shortcut model (IDOSetSportShortcutInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setSportModeSelectCommand:(IDOSetSportShortcutInfoBluetoothModel * _Nullable)sportSelectModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置运动模式排序 | Set motion shortcuts * @param sportSortModel 运动模式排序 model (IDOSetSportSortingInfoBluetoothModel) * sport mode sort Model (IDOSetSportSortingInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setSportModeSortCommand:(IDOSetSportSortingInfoBluetoothModel * _Nullable)sportSortModel callback:(void(^_Nullable)(int errorCode))callback; /** * @brief 设置天气预报数据 | Set weather forecast data * @param weatherDataModel 天气预报数据 model (IDOSetWeatherDataInfoBluetoothModel) * Weather Forecast Data model (IDOSetWeatherDataInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setWeatherDataCommand:(IDOSetWeatherDataInfoBluetoothModel *_Nullable)weatherDataModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置天气预报数据 (定制扩展功能数据不存储) | Set city name (Extend functionality) * @param weatherData 天气预报数据 @{@"today":weatherModel,@"city":@"",@"oneHourWeather":@[@{@"type":@(0),@"temp":@(0)}...]} * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setWeatherDataExtensionCommand:(NSDictionary *_Nullable)weatherData callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置iot按钮集合 (定制扩展功能数据不存储) | Set of iot buttons (Extend functionality) * @param buttonNames iot按钮集合最多可以设置20个按钮 @[@{@"index":@(0),@"button":@""}...] * callback 设置按钮集合回调进度 (0~1) | Set the button progress callback (0~1) * @param complete 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post complete (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setIotButtonNamesCommand:(NSArray * _Nullable)buttonNames callback:(void (^ _Nullable)(float progress))callback complete:(void (^ _Nullable)(int errorCode))complete; /** * @brief 设置屏幕亮度 | Set screen brightness * @param screenBrightnessModel 屏幕亮度 model (IDOSetScreenBrightnessInfoBluetoothModel) * Screen Brightness model (IDOSetScreenBrightnessInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setScreenBrightnessCommand:(IDOSetScreenBrightnessInfoBluetoothModel * _Nullable)screenBrightnessModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置GPS信息 | Set GPS information * @param gpsInfoModel GPS信息 model (IDOSetGpsConfigInfoBluetoothModel) * GPS information model (IDOSetGpsConfigInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setGpsInfoCommand:(IDOSetGpsConfigInfoBluetoothModel * _Nullable)gpsInfoModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置GPS控制信息 | Set GPS Control Information * @param gpsControlModel GPS控制信息 model (IDOSetGpsControlInfoBluetoothModel) * GPS Control Information model (IDOSetGpsControlInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) (status 0 : 写入失败 , 1 : 正在写入 , 2 : 写入完成) */ + (void)setGpsControlCommand:(IDOSetGpsControlInfoBluetoothModel * _Nullable)gpsControlModel callback:(void (^ _Nullable)(int status,int errorCode))callback; /** * @brief 设置控制连接参数 | Setting Control Connection Parameters * @param connParamModel 控制连接参数 model (IDOSetConnParamInfoBluetoothModel) * Control connection parameters model (IDOSetConnParamInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setConnParamCommand:(IDOSetConnParamInfoBluetoothModel * _Nullable)connParamModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置热启动参数 | Setting hot start parameters * @param hotStartParamModel 热启动参数 model (IDOGetHotStartParamBluetoothModel) * Hot Start Parameters model (IDOGetHotStartParamBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setHotStartParamCommand:(IDOGetHotStartParamBluetoothModel * _Nullable)hotStartParamModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置传感器实时数据 | Set sensor real-time data * @param realTimeModel 传感器实时数据 model (IDOSetRealTimeSensorDataInfoBluetoothModel) * Sensor real-time data model (IDOSetRealTimeSensorDataInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setRealTimeSensorDataCommand:(IDOSetRealTimeSensorDataInfoBluetoothModel * _Nullable)realTimeModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置马达参数 | Setting the motor parameters * @param startMotorModel 马达参数 model (IDOSetStartMotorInfoBluetoothModel) * Motor Parameter model (IDOSetStartMotorInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setStartMotorCommand:(IDOSetStartMotorInfoBluetoothModel * _Nullable)startMotorModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置表盘参数 | Setting the dial parameters * @param watchDiaModel 表盘参数 model (IDOSetWatchDiaInfoBluetoothModel) * Dial Parameters model (IDOSetWatchDiaInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setWatchDiaCommand:(IDOSetWatchDiaInfoBluetoothModel * _Nullable)watchDiaModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置血压测量参数 | Setting blood pressure measurement parameters * @param bpMeasureModel 血压测量参数 model (IDOSetBpMeasureInfoBluetoothModel) * Blood pressure measurement parameters model (IDOSetBpMeasureInfoBluetoothModel) * @param callback 设置回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str ; model实时血压数据和状态) * Set callback (errorCode: 0 transmission succeeded, other values are wrong, error code str can be obtained according to IDOErrorCodeToStr; * model real-time blood pressure data and status) */ + (void)setBpMeasureCommand:(IDOSetBpMeasureInfoBluetoothModel * _Nullable)bpMeasureModel callback:(void (^ _Nullable)(int errorCode,IDOSetBpMeasureInfoBluetoothModel * _Nullable model))callback;; /** * @brief 设置睡眠时间段 | Setting the sleep period * @param sleepPeriodModel 睡眠时间段 model (IDOSetSleepPeriodInfoBluetoothModel) * Sleep time period model (IDOSetSleepPeriodInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setSleepPeriodCommand:(IDOSetSleepPeriodInfoBluetoothModel * _Nullable)sleepPeriodModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置女性生理周期 (id205) | Setting the female physiological cycle (id205) * @param menstrualModel 女性生理周期 model (IDOSetMenstruationInfoBluetoothModel) * Female Physiological Cycle model (IDOSetMenstruationInfoBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setMenstrualCommand:(IDOSetMenstruationInfoBluetoothModel * _Nullable)menstrualModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置女性生理周期提醒 (id205) | Set Women's Physiological Cycle Reminder (id205) * @param remindModel 女性生理周期提醒 model (IDOSetMenstruationRemindBluetoothModel) * Female Physiological Cycle Reminder model (IDOSetMenstruationRemindBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setMenstrualRemindCommand:(IDOSetMenstruationRemindBluetoothModel * _Nullable)remindModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置每分钟呼吸次数 (139) | Breaths per minute * @param breatheModel 每分钟呼吸次数 model (IDOSetBreatheTrainBluetoothModel) * Breaths per minute model (IDOSetBreatheTrainBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setBreatheTrainCommand:(IDOSetBreatheTrainBluetoothModel * _Nullable)breatheModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置走动提醒开关 (139) | Walking reminder switch * @param walkModel 走动提醒开关 model (IDOSetWalkReminderBluetoothModel) * Walking reminder switch model (IDOSetWalkReminderBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setWalkReminderCommand:(IDOSetWalkReminderBluetoothModel * _Nullable)walkModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置血氧开关 (139) | blood oxygen switch * @param spo2Model 血氧开关 model (IDOSetSpo2SwitchBluetoothModel) * blood oxygen switch model (IDOSetSpo2SwitchBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setSpo2SwitchCommand:(IDOSetSpo2SwitchBluetoothModel * _Nullable)spo2Model callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置运动开关 (139) | activity switch * @param switchModel 运动开关 model (IDOSetActivitySwitchBluetoothModel) * activity switch model (IDOSetActivitySwitchBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setActivitySwitchCommand:(IDOSetActivitySwitchBluetoothModel * _Nullable)switchModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置心率开关同步 (139) | v3 heart rate * @param v3HrModel 心率开关 model (IDOSetV3HeartRateModeBluetoothModel) * v3 heart rate switch model (IDOSetV3HeartRateModeBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setV3HrModelCommand:(IDOSetV3HeartRateModeBluetoothModel * _Nullable)v3HrModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置喝水提醒 | drink water reminder * @param drinkModel 喝水提醒开关 model (IDOSetDrinkReminderModeBluetoothModel) * drink water reminder switch model (IDOSetDrinkReminderModeBluetoothModel) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setDrinkReminderCommand:(IDOSetDrinkReminderModeBluetoothModel * _Nullable)drinkModel callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置星星数量 数据不作存储 (锐捷) | Set the number of stars (ruijie) * @param startCount 星星数量 (1~5)| number of stars (1~5) * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setStartCountCommand:(NSInteger)startCount callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置蓝牙短信推送 数据不作存储 (锐捷) | Set bluetooth SMS push (ruijie) * @param content 蓝牙短信推送内容 (最长64个字节) | push content （Up to 64 bytes） * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setContentCommand:(NSString * _Nullable)content callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置用户名字 数据不作存储 (锐捷) | Set user name (ruijie) * @param userName 用户名字 (最长10个字节) | user name （Up to 10 bytes） * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setUserNameCommand:(NSString * _Nullable)userName callback:(void (^ _Nullable)(int errorCode))callback; /** * @brief 设置用户号码 数据不作存储 (锐捷) | Set user number (ruijie) * @param userNumber 用户号码 (最长10个字节) | user number （Up to 10 bytes） * @param callback 设置后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Set post callback (errorCode : 0 transfer succeeds, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)setUserNumberCommand:(NSString * _Nullable)userNumber callback:(void (^ _Nullable)(int errorCode))callback; #pragma mark ======= get Command ======= /** * @brief 获取mac地址 | Get mac address * @param callback 执行后回调 data (IDOGetMacAddrInfoBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetMacAddrInfoBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getMacAddrCommand:(void(^_Nullable)(int errorCode,IDOGetMacAddrInfoBluetoothModel * _Nullable data))callback; /** * @brief 获取设备信息 | Get device information * @param callback 执行后回调 data (IDOGetDeviceInfoBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetDeviceInfoBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getDeviceInfoCommand:(void(^_Nullable)(int errorCode,IDOGetDeviceInfoBluetoothModel * _Nullable data))callback; /** * @brief 获取功能列表 | Get the list of features * @param callback 执行后回调 data (IDOGetDeviceFuncBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetDeviceFuncBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getFuncTableCommand:(void(^_Nullable)(int errorCode,IDOGetDeviceFuncBluetoothModel * _Nullable data))callback; /** * 在非OTA模式下连接成功后，需要准备在同步配置时设置的默认数据，回调后根据类型保存需要设置的数据，在同步配置时分别设置，无需单独执行命令(只有支持相应功能类型才会返回) * After successful connection in non-ota mode, you need to prepare the default data set during synchronization configuration, * save the data set according to the type after callback, and set them separately during synchronization configuration without executing separate commands */ + (void)syncConfigSetDefaultValuesCallback:(void(^_Nullable)(IDO_SYNC_CONFIG_DATA_TYPE type,BOOL isComplete))callback; /** * @brief 获得实时数据 | Get real-time data * @param callback 执行后回调 data (IDOGetLiveDataBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetLiveDataBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getLiveDataCommand:(void(^_Nullable)(int errorCode,IDOGetLiveDataBluetoothModel * _Nullable data))callback; /** * @brief 获取设备当前时间 | Get the current time of the device * @param callback 执行后回调 data (IDOGetDeviceTimeBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetDeviceTimeBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getDeviceTimeCommand:(void(^_Nullable)(int errorCode,IDOGetDeviceTimeBluetoothModel * _Nullable data))callback; /** * @brief 获取通知中心的状态 | Get the status of the notification center * @param callback 执行后回调 data (IDOSetNoticeInfoBuletoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOSetNoticeInfoBuletoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getNoticeStatusCommand:(void(^_Nullable)(int errorCode,IDOSetNoticeInfoBuletoothModel * _Nullable data))callback; /** * @brief 获取心率传感器参数 | Get Heart Rate Sensor Parameters * @param callback 执行后回调 data (IDOGetHrSensorParamBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetHrSensorParamBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getHrSensorParamCommand:(void(^_Nullable)(int errorCode,IDOGetHrSensorParamBluetoothModel * _Nullable data))callback; /** * @brief 获取加速度传感器参数 | Acquire acceleration sensor parameters * @param callback 执行后回调 data (IDOGetGsensorParamBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetGsensorParamBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getGsensorParamCommand:(void(^_Nullable)(int errorCode,IDOGetGsensorParamBluetoothModel * _Nullable data))callback; /** * @brief 获取活动数量 | Get the number of events * @param callback 执行后回调 data (IDOGetActivityCountBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetActivityCountBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getActivityCountCommand:(void(^_Nullable)(int errorCode,IDOGetActivityCountBluetoothModel * _Nullable data))callback; /** * @brief 获取hid信息 | Get hid information * @param callback 执行后回调 data (IDOGetHidInfoBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetHidInfoBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getHidInfoCommand:(void(^_Nullable)(int errorCode,IDOGetHidInfoBluetoothModel * _Nullable data))callback; /** * @brief 获取gps信息 | Get gps information * @param callback 执行后回调 data (IDOGetGpsInfoBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetGpsInfoBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getGpsInfoCommand:(void(^_Nullable)(int errorCode,IDOGetGpsInfoBluetoothModel * _Nullable data))callback; /** * @brief 获取热启动参数 | Get hot start parameters * @param callback 执行后回调 data (IDOGetHotStartParamBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetHotStartParamBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getHotStartParamCommand:(void(^_Nullable)(int errorCode,IDOGetHotStartParamBluetoothModel * _Nullable data))callback; /** * @brief 获取GPS状态 | Get GPS status * @param callback 执行后回调 data (IDOGetGpsStatusBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetGpsStatusBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getGpsStatusCommand:(void(^_Nullable)(int errorCode,IDOGetGpsStatusBluetoothModel * _Nullable data))callback; /** * @brief 获取版本信息 | Get version information * @param callback 执行后回调 data (IDOGetVersionInfoBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetVersionInfoBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getVersionInfoCommand:(void(^_Nullable)(int errorCode,IDOGetVersionInfoBluetoothModel * _Nullable data))callback; /** * @brief 获取realtek平台 ota授权 | Obtain ota authorization of realtek platform * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) * stateCode 0x00:校验成功,0x01:ID号校验失败,0x02:版本号校验失败,0x03:电量不足,0x04:其他错误 * stateCode 0x00: verification success,0x01:ID number verification failure,0x02: version number verification failure,0x03: insufficient power,0x04: other errors */ + (void)getOtaAuthInfoCommand:(void(^_Nullable)(int errorCode,int stateCode))callback; /** * @brief 获取5个心率区间交换数据 | Exchange data of 5 heart rate intervals were obtained * @param exchangeModel 运动过程中交互数据模型 | Interactive data model during motion * @param callback 执行后回调 data (IDOGetFiveHrReplyInfoBluetoothModel) * (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetFiveHrReplyInfoBluetoothModel) * (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getSwithHrInterval:(IDODataExchangeModel * _Nullable)exchangeModel callback:(void(^_Nullable)(int errorCode,IDOGetFiveHrReplyInfoBluetoothModel * _Nullable data))callback; /** * @brief 默认的运动类型 | get default sport type * @param callback 执行后回调 data (IDOGetDefaultSportTypeBluetoothModel) (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Post-execution callback data (IDOGetDefaultSportTypeBluetoothModel) (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getDefaultSportTypeCommand:(void(^_Nullable)(int errorCode,IDOGetDefaultSportTypeBluetoothModel * _Nullable data))callback; /** * @brief 获取星星的数量,数据不作存储（锐捷） | Get number of stars （ruijie） * @param callback 执行后回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * (errorCode : 0 The transfer was successful, the other values are errors, and the error code str can be obtained according to IDOErrorCodeToStr) */ + (void)getStartCountCommand:(void (^ _Nullable)(int errorCode,NSInteger startCount))callback; #pragma mark ======= listen Command ======= /** * @brief 音乐开始 | Music begins * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenMusicStartCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 音乐暂停 | Music pause * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenMusicPauseCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 音乐结束 | End of music * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenMusicStopCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 音乐上一首 | Music on the first * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenMusicLastCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 音乐下一首 | Music next * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenMusicNextCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 单次拍照 | Single photo * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenPhotoSingleShotCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 连续拍照 | Taking photos continuously * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenPhotoBurstCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 拍照开始 | Take a photo * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenPhotoStartCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 拍照结束 | End of photo * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenPhotoEndCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 音量+ | Volume + * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenVolumeUpCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 音量- | Volume - * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenVolumeDownCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 寻找手机开始 | Looking for a mobile phone to start * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenFindPhoneStartCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 寻找手机结束 | Looking for the end of the phone * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenFindPhoneStopCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 防丢启动 | Anti-lost start * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenLostStartCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 防丢结束 | Anti-lost end * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenLostStopCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 一键求救 | One button for help * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenSosStartCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 闹钟同步完成 | Alarm clock synchronization completed * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenAlarmSyncCompleteCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 配置同步完成 | Configure synchronization completion * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenConfigSyncCompleteCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 健康同步完成 | Health sync completed * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenHealthSyncCompleteCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 数据传输完成 | Data transfer completed * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenDataTranCompleteCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 配置快速同步完成 | Configuring Fast Sync Complete * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenConfigFastSyncCompleteCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief GPS数据同步完成 | GPS data synchronization completed * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenGpsSyncCompleteCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 活动数据同步完成 | Activity data synchronization completed * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenActivitySyncCompleteCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 手环检查版本号 | Bracelet checks the version number * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenCheckUpdateReplyCommand:(void(^_Nullable)(int errorCode))callback; /** * @brief 手环发送iot按钮 | Bracelet send iot buttons * @param callback 监听回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str,index 对应按钮索引) * Listening callback (errorCode : 0 is successful, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)listenIotButtonCommand:(void(^_Nullable)(int errorCode,int index))callback; #pragma mark ======= progress Command ======= /** * @brief 健康数据同步进度 | Health data synchronization progress * @param callback 健康数据同步进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Health data synchronization progress callback (errorCode : 0 transmission success, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)healthSyncProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback; /** * @brief 闹钟数据同步进度 | Alarm data synchronization progress * @param callback 闹钟数据同步进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Alarm data synchronization progress callback (errorCode : 0 transmission success, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)alarmSyncProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback; /** * @brief 活动数据同步进度 | Activity data synchronization progress * @param callback 活动数据同步进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Activity data synchronization progress callback (errorCode : 0 transmission success, other values are errors, you can get error code str according to IDOErrorCodeToStr) */ + (void)activitySyncProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback; /** * @brief 数据交换进度 手环->app | Data Exchange Progress Bracelet -> app * @param callback 数据交换进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Data exchange progress callback (errorCode: 0 transmission succeeded, other values are errors, error code str can be obtained according to IDOErrorCodeToStr) */ + (void)dataTranProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback; /** * @brief gps数据同步进度 | gps data synchronization progress * @param callback gps数据同步进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * gps data synchronization progress callback (errorCode: 0 transmission success, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)gpsProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback; /** * @brief 数据交换进度 app->手环 | Data Exchange Progress app->Bracelet * @param callback 数据交换进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Data exchange progress callback (errorCode: 0 transmission succeeded, other values are errors, error code str can be obtained according to IDOErrorCodeToStr) */ + (void)appDataTranProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback; /** * @brief 配置同步进度 | Configure synchronization progress * @param callback 配置同步进度回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Configure synchronization progress callback (errorCode : 0 transmission succeeded, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)configSyncProgressCommand:(void(^_Nullable)(int progress,int errorCode))callback; #pragma mark ======= data exchange Command ======= /** * @brief app 发起运动开始 | app starts the campaign * @param model IDODataExchangeModel (数据交换model, day|hour|minute|second|sportType|targetType|targetValue|forceStart 这些属性需要赋值) * IDODataExchangeModel (data exchange model, day|hour|minute|second|sportType|targetType|targetValue|forceStart These attributes need to be assigned) * @param startCallback 运动发起回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Motion initiated callback (errorCode : 0 transmission succeeded, other values are errors, error code str can be obtained according to IDOErrorCodeToStr) */ + (void)appStartSportCommand:(IDODataExchangeModel * _Nullable)model startCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))startCallback; /** * @brief app 发起运动结束 | app initiates the end of the campaign * @param model IDODataExchangeModel 活动时间需要保持一致,才能停止活动不然无效,当前model对象为全局时,只要开始活动记录开始时间, * 结束时不需要再次给时间赋值,只需要给 durations|calories|distance|sportType|isSave 这些属性需要赋值 * IDODataExchangeModel activity time needs to be consistent in order to stop the activity or it will be invalid. When the current model object is global, * just start the activity record start time. You don't need to assign values to the time at the end, just give durations|calories|distance|sportType|isSave * these properties need to be assigned. * @param appEndCallback 运动停止回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Motion stop callback (errorCode : 0 transfer succeeded, other values are wrong, you can get error code str according to IDOErrorCodeToStr) */ + (void)appEndSportCommand:(IDODataExchangeModel *_Nullable)model appEndcallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))appEndCallback; /** * @brief app发起的运动 手环主动结束 | App-initiated sports bracelet ends actively * @param model IDODataExchangeModel 手环主动发起结束 APP需要给手环发送运动数据, durations|calories|distance|errorCode 这些属性需要赋值 * IDODataExchangeModel The bracelet is actively launched. The APP needs to send motion data to the bracelet. durations|calories|distance|errorCode * These attributes need to be assigned. * @param appBleEndCallback 手环发起停止回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * The bracelet initiates a stop callback (errorCode: 0 is successfully transmitted, other values are incorrect, and error code str can be obtained according to IDOErrorCodeToStr) */ + (void)appBleEndReplyCommand:(IDODataExchangeModel *_Nullable)model appBleEndCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))appBleEndCallback; /** * @brief app发起运动暂停 | app initiates a motion pause * @param model IDODataExchangeModel 活动时间需要保持一致,才能暂停活动不然无效,当前model对象为全局时,只要开始活动记录开始时间,暂停时不需要再次给时间赋值,直接传入当前model * IDODataExchangeModel activity time needs to be consistent in order to pause activity or not, when the current model object is global,  As soon as you start the activity * record start time, you don't need to assign time to the timeout when you pause, you can directly pass in the current model. * @param pauseCallback 运动暂停回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Motion pause callback (errorCode : 0 transmission success, other values are errors, you can get error code str according to IDOErrorCodeToStr) */ + (void)appPauseSportCommand:(IDODataExchangeModel *_Nullable)model pauseCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))pauseCallback; /** * @brief app发起的运动 手环主动暂停 | App-initiated sports bracelet active suspension * @param model IDODataExchangeModel 手环主动发起暂停 APP需要给手环发送运动数据, errorCode 这个属性需要赋值 * IDODataExchangeModel The bracelet initiates a pause. The APP needs to send motion data to the bracelet. The errorCode attribute needs to be assigned. * @param appBlePauseCallback 手环发起暂停回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * The bracelet initiates a pause callback (errorCode: 0 is successfully transmitted, other values are errors, and error code str can be obtained according to IDOErrorCodeToStr) */ + (void)appBlePauseReplyCommand:(IDODataExchangeModel *_Nullable)model appBlePauseCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))appBlePauseCallback; /** * @brief app 发起运动恢复 | app initiates motion recovery * @param model IDODataExchangeModel 活动时间需要保持一致,才能恢复活动不然无效,当前model对象为全局时,只要开始活动记录开始时间,恢复时不需要再次给时间赋值,直接传入当前model * IDODataExchangeModel activity time needs to be consistent in order to restore activity or not, when the current model object is global,As soon as you start the activity * record start time, you don't need to assign time to the time when restoring, you can directly pass in the current model. * @param appRestoreCallback 运动恢复回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Motion recovery callback (errorCode : 0 transmission succeeded, other values are wrong, error code str can be obtained according to IDOErrorCodeToStr) */ + (void)appRestoreSportCommand:(IDODataExchangeModel * _Nullable)model appRestoreCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))appRestoreCallback; /** * @brief app发起的运动 手环主动恢复 | app-initiated sports bracelet active recovery * @param model IDODataExchangeModel 手环主动发起恢复 APP需要给手环发送运动数据, errorCode 这个属性需要赋值 * IDODataExchangeModel The bracelet initiates recovery. The APP needs to send motion data to the bracelet. The errorCode attribute needs to be assigned. * @param appBleRestoreCallback 手环发起恢复回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * The bracelet initiates a recovery callback (errorCode : 0 is successfully transmitted, other values are incorrect, and error code str can be obtained according to IDOErrorCodeToStr) */ + (void)appBleRestoreReplyCommand:(IDODataExchangeModel *_Nullable)model appBleRestoreCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))appBleRestoreCallback; /** * @brief app发起数据交换过程 | app initiates the data exchange process * @param model IDODataExchangeModel 活动时间需要保持一致,才能发送活动数据不然无效,当前model对象为全局时,只要开始活动记录开始时间,发送活动数据时不需要再次给时间赋值, * 只需要给 status|duration|calories|distance 这些属性需要赋值 * IDODataExchangeModel Activity time needs to be consistent in order to send active data or it is invalid. When the current model object is global, as long as the activity * record start time is started, it is not necessary to assign time to the event when sending the activity data, just to status|duration|calories|distance * These attributes need to be assigned. * @param appIngCallback 运动发送数据回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * Motion sends data callback (errorCode : 0 transmission succeeded, other values are errors, error code str can be obtained according to IDOErrorCodeToStr) */ + (void)appIngSportCommand:(IDODataExchangeModel *_Nullable)model appIngCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))appIngCallback; /** * @brief 手环发起运动开始 | The bracelet starts the campaign * @param model IDODataExchangeModel 只需要给 retCode 这个属性需要赋值 * IDODataExchangeModel only needs to assign value to retCode property * @param bleStartCallback 手环发起运动开始回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * The bracelet initiates a motion start callback (errorCode : 0 is successfully transmitted, other values are wrong, and error code str can be obtained according to IDOErrorCodeToStr) */ + (void)bleStartSportCommand:(IDODataExchangeModel *_Nullable)model bleStartCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))bleStartCallback; /** * @brief 手环发起运动暂停 | The bracelet initiates a motion pause * @param model IDODataExchangeModel 只需要给 retCode 这个属性需要赋值 * IDODataExchangeModel only needs to assign value to retCode property * @param blePauseCallback 手环发起运动暂停回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * The bracelet initiates a motion pause callback (errorCode : 0 is successfully transmitted, other values are incorrect, and error code str can be obtained according to IDOErrorCodeToStr) */ + (void)blePauseSportCommand:(IDODataExchangeModel *_Nullable)model blePauseCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))blePauseCallback; /** * @brief 手环发起运动恢复 | Bracelet initiates sports recovery * @param model IDODataExchangeModel 只需要给 retCode 这个属性需要赋值 * IDODataExchangeModel only needs to assign value to retCode property * @param bleRestoreCallback 手环发起运动恢复回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * The bracelet initiates a motion recovery callback (errorCode : 0 is successfully transmitted, other values are wrong, and error code str can be obtained according to IDOErrorCodeToStr) */ + (void)bleRestoreSportCommand:(IDODataExchangeModel *_Nullable)model bleRestoreCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))bleRestoreCallback; /** * @brief 手环发起运动结束 | The bracelet starts the campaign * @param model IDODataExchangeModel 只需要给 retCode 这个属性需要赋值 * IDODataExchangeModel only needs to assign value to retCode property * @param bleEndCallback 手环发起运动结束回调 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) * The bracelet initiates a motion end callback (errorCode : 0 is successfully transmitted, other values are errors, and error code str can be obtained according to IDOErrorCodeToStr) */ + (void)bleEndSportCommand:(IDODataExchangeModel *_Nullable)model bleEndCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))bleEndCallback; /** * @brief 手环发起运动发送数据 | The bracelet initiates a motion to send data * @param model IDODataExchangeModel 只需要给 distance 这个属性需要赋值 * @param bleIngCallback 手环发起运动发送数据 (errorCode : 0 传输成功,其他值为错误,可以根据 IDOErrorCodeToStr 获取错误码str) */ + (void)bleIngSportCommand:(IDODataExchangeModel *_Nullable)model bleIngCallback:(void (^_Nullable)(IDODataExchangeModel * _Nullable model,int errorCode))bleIngCallback; @end