1 files changed, 294 insertions, 0 deletions

diff --git a/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BG5S.h b/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BG5S.h
new file mode 100644
index 0000000..08cca13
--- /dev/null
+++ b/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BG5S.h
@@ -0,0 +1,294 @@
+//
+//  BG5S.h
+//  iHealthSDKStatic
+//
+//  Created by Lei Bao on 2017/6/30.
+//  Copyright © 2017年 daiqingquan. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "BGMacroFile.h"
+
+// --------------- DELEGATE ---------------
+@class BG5S;
+
+/**
+ BG5SDelegate
+ */
+@protocol BG5SDelegate <NSObject>
+@required
+
+/**
+ Device sends an error
+
+ @param device active device
+ @param error error number
+ @param errorDescription error message
+ */
+- (void)device:(BG5S *)device occurError:(BG5SError)error errorDescription:(NSString *)errorDescription;
+
+/**
+ Device sends strip state message
+ @note Only after startMeasure: method is called, does the device send strip state message.
+ If you insert strip before calling startMeasure: method, the device doesn't send strip state(Insert or Pull off) until startMeasure: method is called.
+ @param device active device
+ @param state BG5SStripState enum
+ */
+- (void)device:(BG5S *)device stripStateDidUpdate:(BG5SStripState)state;
+
+/**
+ Device sends drop blood or ctl message
+ @note After reciving this message, you should not call any method until you recive result. If called, the method may be timeout.
+ @param device active device
+ */
+- (void)deviceDropBlood:(BG5S *)device;
+
+/**
+ Device sends result
+
+ @param device active device
+ @param dataID data identifier (Only for SDK users)
+ @param result blood glucose value with mg/dL unit
+ */
+- (void)device:(BG5S *)device dataID:(NSString *)dataID measureReult:(NSInteger)result;
+
+/**
+ Device sends charging state
+ @note Only state changes, is the message sent.
+ @param device active device
+ @param state BG5SChargeState object
+ */
+- (void)device:(BG5S *)device chargeStateDidUpdate:(BG5SChargeState)state;
+@end
+
+/**
+ state information of BG5S when call "queryStateInfoWithSuccess:"
+ */
+@interface BG5SStateInfo : NSObject
+
+/**
+ 0-100 means battery percent, 255 means charging
+ */
+@property (assign, nonatomic, readonly) NSInteger batteryValue;
+
+/**
+ device date (UTC)
+ */
+@property (copy, nonatomic, readonly) NSDate *deviceDate;
+
+/**
+ device timezon -12.00 to 14.00. Without setting, default timezone is 0.00
+ */
+@property (assign, nonatomic, readonly) float deviceTimeZone;
+
+/**
+ quantity of strip used in measurement.range:[0,65535]. If value is 65535, there may be something wrong with BG5S. Because 65535 is very large number for true user.
+ */
+@property (assign, nonatomic, readonly) NSInteger stripUsedValue;
+
+/**
+ quantity of record measuring without connecting to APP.range:[0,500]. If value is 65535, there may be something wrong with BG5S.
+ */
+@property (assign, nonatomic, readonly) NSInteger offlineDataQuantity;
+
+/**
+ blood code version (0-255)
+ */
+@property (assign, nonatomic, readonly) NSInteger bloodCodeVersion;
+
+/**
+ ctl code version (0-255)
+ */
+@property (assign, nonatomic, readonly) NSInteger ctlCodeVersion;
+
+/**
+ measure unit (BGUnit_Unknown means that BG5S has never been set unit from App,BGUnit_mmolPL stands for mmol/L,BGUnit_mgPmL stands for mg/dL)
+ */
+@property (assign, nonatomic, readonly) BGUnit unit;
+
+@end
+
+/**
+ Offline data model of BG5S
+ */
+@interface BG5SRecordModel : NSObject
+
+/**
+ Data ID (Only for SDK users)
+ */
+@property (copy, nonatomic, readonly) NSString *dataID;
+
+/**
+ Measure Date (UTC)
+ */
+@property (copy, nonatomic, readonly) NSDate *measureDate;
+
+/**
+ Time zone
+ */
+@property (assign, nonatomic, readonly) float timeZone;
+
+/**
+ BG Value with mg/dL unit
+ */
+@property (assign, nonatomic, readonly) NSInteger value;
+
+/**
+ Correct Flag, YES:can be corrected, NO:cannot be corrected
+ */
+@property (assign, nonatomic, readonly) BOOL canCorrect;
+
+@end
+
+/**
+ Modified offline data model of BG5S
+ */
+@interface BG5SRecordModifiedModel : NSObject
+
+/**
+ Data ID (Only for SDK users)
+ */
+@property (copy, nonatomic) NSString *dataID;
+
+/**
+ Measure Date (UTC)
+ */
+@property (copy, nonatomic) NSDate *measureDate;
+
+/**
+ Time zone
+ */
+@property (assign, nonatomic,) float timeZone;
+
+/**
+ BG Value with mg/dL unit
+ */
+@property (assign, nonatomic) NSInteger value;
+
+@end
+
+/**
+ BG5S
+ */
+@interface BG5S : BGDevice
+
+@property (weak, nonatomic) id<BG5SDelegate> delegate;
+
+/**
+ Query BG5S state information including battery value,device date, device timezone, strip used, quantity of offline data, blood code version, CTL code version, unit.
+
+ @param stateInfoBlock BG5SStateInfo object
+ @param errorBlock the block means fail. You can get error from this block
+ @note  If analysis occurs error, BG5SStateInfo object maybe nil or some of its property are nil.
+ */
+- (void)queryStateInfoWithSuccess:(BG5SStateInfoBlock)stateInfoBlock
+                       errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+/**
+ Set time
+
+ @param date the date you want to set should be an UTC time. valid range:Jan. 1,2000 - Dec. 31,2099. If date is nil, use [NSdate date] and system time zone
+ @param timezone the timezone you want to set should be from -12.00 to 14.00; step length = 0.25
+ @param successBlock the block means success
+ @param errorBlock the block means fail. You can get error from this block
+ @note  If date is out of reange, BG5SError_InputParametersError will be returned by block. 
+        If date and timezone are invalid , use input parameters; otherwise use [NSdate date] and system time zone;
+ */
+- (void)setTimeWithDate:(NSDate *)date
+               timezone:(float)timezone
+           successBlock:(BG5SSuccessBlock)successBlock
+             errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+/**
+ Set unit
+
+ @param unit the unit you want to set (BGUnit_mmolPL stands for mmol/L,BGUnit_mgPmL stands for mg/dL)
+ @param successBlock the block means success
+ @param errorBlock the block means fail. You can get error from this block
+ */
+- (void)setUnit:(BGUnit)unit
+   successBlock:(BG5SSuccessBlock)successBlock
+      errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+/**
+ Delete strip used info (the quantity of strip used is set to 0)
+
+ @param successBlock the block means success
+ @param errorBlock the block means fail. You can get error from this block
+ */
+- (void)deleteStripUsedInfoWithSuccessBlock:(BG5SSuccessBlock)successBlock
+                                  errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+/**
+ Query record data stored in BG5S
+
+ @param successBlock the block means success; if has record, return non-empty array (BG5SRecordModel object); if no record, return empty array
+ @param errorBlock the block means fail. You can get error from this block
+ */
+- (void)queryRecordWithSuccessBlock:(BG5SRecordBlock)successBlock
+                          errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+
+/**
+ Delete record data stored in BG5S
+ 
+ @param successBlock the block means success
+ @param errorBlock the block means fail. You can get error from this block
+ */
+- (void)deleteRecordWithSuccessBlock:(BG5SSuccessBlock)successBlock
+                          errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+/**
+ Start online measurement with specific measure mode. 
+ 
+ @note  If you don't call this method, BG5S use blood mode by default. 
+ 
+ If CTL mode is sent, BG5S use CTL mode and BG5S can't be set to use blood mode until next connection.
+ @param measureMode Blood or CTL
+ @param successBlock the block means success
+ @param errorBlock the block means fail. You can get error from this block
+ */
+- (void)startMeasure:(BGMeasureMode)measureMode
+    withSuccessBlock:(BG5SSuccessBlock)successBlock
+           errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+/**
+ Disconnect device
+ */
+- (void)disconnectDevice;
+
+/**
+ Correct Measure Date if canCorrect is YES in BG5SRecordModel
+
+ @param array BG5SRecordModel objects
+ @param deviceDate This date should be read before set time method called.
+ @return BG5SRecordModifiedModel objects; return empty array means input parameters is wrong.
+ */
+- (NSArray *)processData:(NSArray<BG5SRecordModel*> *)array deviceDate:(NSDate *)deviceDate;
+
+
+/**
+ 
+ Is offline measurement allowed
+ 
+ @param isOffline  Is offline measurement allowed    0:allowed  1:Offline measurement is not allowed
+ @param successBlock the block means success
+ @param errorBlock the block means fail. You can get error from this block
+ */
+- (void)setIsOfflineMeasurementAllowed:(BOOL)isOffline
+successBlock:(BG5SSuccessBlock)successBlock
+                          errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+
+- (void)setCodeWithMeasureMode:(BGMeasureMode)mode
+                   resultBlock:(BG5SSetCodeResultBlock)resultBlock
+                    errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+- (void)readDeviceInfoWithSuccessBlock:(BG5SDeviceInfoBlock)deviceInfoBlock
+ errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+- (void)commandCloseDeviceBLEWithSuccessBlock:(BG5SSuccessBlock)successBlock errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+- (void)commandSetDeviceDisplay:(BOOL)isDisplay successBlock:(BG5SSuccessBlock)successBlock errorBlock:(BG5SSDKErrorBlock)errorBlock;
+
+@end