Local iHealth SDK, device detail screen, iOS event fixes

1 files changed, 101 insertions, 0 deletions

diff --git a/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP5SRW.h b/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP5SRW.h
new file mode 100644
index 0000000..e2e8d77
--- /dev/null
+++ b/libs/ihealth-sdk/ios/ReactNativeIOSLibrary/Communication_SDK/Headers/BP5SRW.h
@@ -0,0 +1,101 @@
+//
+//  BP5SRW.h
+//  testShareCommunication
+//
+//  Created by my on 14/10/13.
+//  Copyright (c) 2013年 my. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "BPDevice.h"
+#import <UIKit/UIKit.h>
+
+
+/**
+ BP5SRW device class
+ */
+@interface BP5SRW : BPDevice
+
+
+
+/**
+ * Establish measurement connection and start BP measurement.
+ *  @Notice   By the first time of new user register via SDK, ‘iHealth disclaimer’ will pop up automatically, and require the user agrees to continue. SDK application requires Internet connection; there is 10-day tryout if SDK cannot connect Internet, SDK is fully functional during tryout period, but will be terminated without verification through Internet after 10 days.
+ * @param blockZeroState Zeroing state
+ * @param pressure  Pressure value in the process of measurement, the unit is ‘mmHg’.
+ * @param blockWaveletWithHeartbeat   Wavelet data set with heart beat.
+ * @param blockWaveletWithoutHeartbeat   Wavelet data set without heart beat.
+ * @param result   result of the measurement, including systolic pressure, diastolic pressure, pulse rate and irregular judgment. Relevant key: time, sys, dia, heartRate, irregular.
+ * @param redWave A block to return wave information,include the packets order number(0~255),the current measure status(@1 means measuring，@2 means constant Pressure measuring，@3 means completed),the pressure data type(@1 means pressure data ,@2 means wave data) ,the pressure or wave count ,the pressure or wave data array.The corresponding keys are @"packetOrderID",@"measureStatusID",@"pressureDataType",@"pressureCount",@"pressureArray".
+ * @param error   Return error codes.
+ * Specification:
+ *   1.  BPError0 = 0: Unable to take measurements due to arm/wrist movements.
+ *   2.  BPError1:  Failed to detect systolic pressure.
+ *   3.  BPError2:  Failed to detect diastolic pressure.
+ *   4.  BPError3:  Pneumatic system blocked or cuff is too tight during inflation.
+ *   5.  BPError4:  Pneumatic system leakage or cuff is too loose during inflation.
+ *   6.  BPError5:  Cuff pressure reached over 300mmHg.
+ *   7.  BPError6:  Cuff pressure reached over 15 mmHg for more than 160 seconds.
+ *   8.  BPError7:  Data retrieving error.
+ *   9.  BPError8:  Data retrieving error.
+ *   10.  BPError9:  Data retrieving error.
+ *   11.  BPError10:  Data retrieving error.
+ *   12.  BPError11:  Communication Error.
+ *   13.  BPError12:  Communication Error.
+ *   14.  BPError13:  Low battery.
+ *   15.  BPError14:  Device bluetooth set failed.
+ *   16.  BPError15:  Systolic exceeds 260mmHg or diastolic exceeds 199mmHg.
+ *   17.  BPError16:  Systolic below 60mmHg or diastolic below 40mmHg.
+ *   18.  BPError17:  Arm/wrist movement beyond range.
+ *   19.  BPError18:  Bleed to specified pressure over time
+ *   20.  BPError19: Constant pressure acquisition process changes over the specified range of pressure.
+ *   21.  BPNormalError=30:  device error, error message displayed automatically.
+ *   22.  BPOverTimeError:  Abnormal communication.
+ *   23.  BPNoRespondError:  Abnormal communication.
+ *   24.  BPBeyondRangeError:  device is out of communication range.
+ *   25.  BPDidDisconnect:  device is disconnected.
+ *   26.  BPAskToStopMeasure:  measurement has been stopped.
+ *   27.  BPInputParameterError=400:  Parameter input error.
+ */
+
+-(void)commandStartMeasureWithZeroingState:(BlockZero)blockZeroState pressure:(BlockPressure)pressure waveletWithHeartbeat:(BlockWavelet)blockWaveletWithHeartbeat waveletWithoutHeartbeat:(BlockWavelet)blockWaveletWithoutHeartbeat  result:(BlockMeasureResult)result redWave:(BlockRedWaveDic)redWave errorBlock:(BlockError)error;
+
+/**
+ * Measurement termination and stop BP5SRW measurement
+ * @param success  The block return means measurement has been terminated.
+ * @param error  A block to return the error in ‘Establish measurement connection’ in BP5SRW.
+ */
+-(void)stopBPMeassureSuccessBlock:(BlockSuccess)success errorBlock:(BlockError)error;
+
+/**
+ * Synchronize time and judge if the device supports BT auto-connection, offline detection, and if the function on or off, corresponding KEY as haveBlue, haveOffline, blueOpen, offlineOpen. ‘True’ means yes or on, ‘False’ means no or off
+ * @param function  A block to return the function and states that the device supports.
+ * @param error  A block to refer ‘error’ in ‘Establish measurement connection’ in BP5SRW.
+ */
+-(void)commandFunction:(BlockDeviceFunction)function errorBlock:(BlockError)error;
+
+/**
+ * Query battery remaining energy
+ * @param energyValue  A block to return the device battery remaining energy percentage, ‘80’ stands for 80%.
+ * @param error  A block to return the error in ‘Establish measurement connection’.
+ */
+-(void)commandEnergy:(BlockEnergyValue)energyValue errorBlock:(BlockError)error;
+
+
+/**
+ Set the target measure configure
+
+ @param targetPressure Set the target constant pressure in measuring.
+ @param fluctuationPressure Set the allowed range of pressure fluctuations.
+ @param sampleTime Set the pressure sample time.
+ @param setResult Success callback
+ @param error A block to return the error in ‘Establish measurement connection’.
+ */
+-(void)CommandSetPressureSamplewithTargetPressure:(NSNumber *)targetPressure fluctuationRange:(NSNumber *)fluctuationPressure sampleTime:(NSNumber *)sampleTime disposeSetPresureTargetSuccess:(BlockSuccess)setResult errorBlock:(BlockError)error;
+
+/**
+ * Disconnect current device
+ */
+-(void)commandDisconnectDevice;
+
+@end